dmesg - AMD Radeon HD 6670

Return To AMD Radeon HD 6670 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-28-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #48~precise1-Ubuntu SMP Wed Apr 24 21:42:24 UTC 2013 (Ubuntu 3.5.0-28.48~precise1-generic 3.5.7.9)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e7000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dffaffff] usable
BIOS-e820: [mem 0x00000000dffb0000-0x00000000dffbffff] ACPI data
BIOS-e820: [mem 0x00000000dffc0000-0x00000000dffeffff] ACPI NVS
BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68C-S UCC, BIOS P1.60 09/19/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000120000000 aka 4608M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdffb0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xdffaffff]
 [mem 0x00000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xdfdfffff] page 2M
 [mem 0xdfe00000-0xdffaffff] page 4k
kernel direct mapping tables up to 0xdffaffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x11fffffff]
 [mem 0x100000000-0x11fffffff] page 2M
kernel direct mapping tables up to 0x11fffffff @ [mem 0xdffae000-0xdffaffff]
RAMDISK: [mem 0x36220000-0x37107fff]
ACPI: RSDP 00000000000fb580 00014 (v00 ACPIAM)
ACPI: RSDT 00000000dffb0000 00040 (v01 A_M_I  OEMRSDT  09001119 MSFT 00000097)
ACPI: FACP 00000000dffb0200 00084 (v02 A_M_I  OEMFACP  12000601 MSFT 00000097)
ACPI: DSDT 00000000dffb0460 0495C (v01  AS361 AS361151 00000151 INTL 20051117)
ACPI: FACS 00000000dffc0000 00040
ACPI: APIC 00000000dffb0390 00090 (v01 A_M_I  OEMAPIC  09001119 MSFT 00000097)
ACPI: MCFG 00000000dffb0420 0003C (v01 A_M_I  OEMMCFG  09001119 MSFT 00000097)
ACPI: OEMB 00000000dffc0040 00061 (v01 A_M_I  AMI_OEM  09001119 MSFT 00000097)
ACPI: SRAT 00000000dffb4dc0 000E8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
ACPI: AAFT 00000000dffb4eb0 00027 (v01 A_M_I  OEMAAFT  09001119 MSFT 00000097)
ACPI: SSDT 00000000dffb4ee0 0088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xdfffffff] -> [mem 0x00000000-0xdfffffff]
NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x11fffffff] -> [mem 0x00000000-0x11fffffff]
Initmem setup node 0 [mem 0x00000000-0x11fffffff]
  NODE_DATA [mem 0x11fffc000-0x11fffffff]
 [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x11fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009efff]
  node   0: [mem 0x00100000-0xdffaffff]
  node   0: [mem 0x100000000-0x11fffffff]
On node 0 totalpages: 1048383
  DMA zone: 64 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3913 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 897008 pages, LIFO batch:31
  Normal zone: 2048 pages used for memmap
  Normal zone: 129024 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
PM: Registered nosave memory: 00000000dffb0000 - 00000000dffc0000
PM: Registered nosave memory: 00000000dffc0000 - 00000000dfff0000
PM: Registered nosave memory: 00000000dfff0000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - - 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029945
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ d4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ d4000000
PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
Memory: 3964608k/4718592k available (6820k kernel code, 525060k absent, 228924k reserved, 6347k data, 948k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 3384.969 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6769.93 BogoMIPS (lpj=13539876)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
ACPI: Core revision 20120320
ftrace: allocating 27621 entries in 108 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 B55 Processor stepping 03
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node   0, Processors  #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (27079.75 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdffc0000-0xdffeffff] (196608 bytes)
dummy: 
RTC time: 15:29:51, date: 05/12/13
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xfc000000-0xfdffffff]
node 0 link 0: mmio [fc000000, fdffffff] ==> none
node 0 link 0: mmio [e0000000, fbffffff]
node 0 link 0: mmio [fe000000, fe0bffff]
node 0 link 0: mmio [a0000, bffff]
TOM2: 0000000120000000 aka 4608M
bus: [00, 07] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0xe0000000-0xfbffffff]
bus: 00 [mem 0xfe000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x120000000-0xfcffffffff]
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xff37ffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xff37ffff]
pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
pci 0000:00:01.0: reg 10: [io  0x0900-0x09ff]
pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
pci 0000:00:01.1: reg 10: [io  0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20: [io  0x0600-0x063f]
pci 0000:00:01.1: reg 24: [io  0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
pci 0000:00:02.0: reg 10: [mem 0xfbeff000-0xfbefffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
pci 0000:00:02.1: reg 10: [mem 0xfbefec00-0xfbefecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
pci 0000:00:05.0: reg 10: [mem 0xfbef8000-0xfbefbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
pci 0000:00:06.0: reg 20: [io  0xffa0-0xffaf]
pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
pci 0000:00:07.0: reg 10: [mem 0xfbefd000-0xfbefdfff]
pci 0000:00:07.0: reg 14: [io  0xd480-0xd487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.0: reg 10: [io  0xd400-0xd407]
pci 0000:00:08.0: reg 14: [io  0xd080-0xd083]
pci 0000:00:08.0: reg 18: [io  0xd000-0xd007]
pci 0000:00:08.0: reg 1c: [io  0xcc00-0xcc03]
pci 0000:00:08.0: reg 20: [io  0xc880-0xc88f]
pci 0000:00:08.0: reg 24: [mem 0xfbefc000-0xfbefcfff]
pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.1: reg 10: [io  0xc800-0xc807]
pci 0000:00:08.1: reg 14: [io  0xc480-0xc483]
pci 0000:00:08.1: reg 18: [io  0xc400-0xc407]
pci 0000:00:08.1: reg 1c: [io  0xc080-0xc083]
pci 0000:00:08.1: reg 20: [io  0xc000-0xc00f]
pci 0000:00:08.1: reg 24: [mem 0xfbef7000-0xfbef7fff]
pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:04.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:04.0:   bridge window [mem 0xe0000000-0xff37ffff] (subtractive decode)
pci 0000:02:00.0: [1002:6758] type 00 class 0x030000
pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xfbfe0000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 20: [io  0xe000-0xe0ff]
pci 0000:02:00.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa90] type 00 class 0x040300
pci 0000:02:00.1: reg 10: [mem 0xfbfbc000-0xfbfbffff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:09.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20120320/utresrc-650)
ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20120320/pci_link-282)
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdffb0000-0xdfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xe0000000-0xff37ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io  0x0000-0x000f]
pnp 00:01: [io  0x0081-0x0083]
pnp 00:01: [io  0x0087]
pnp 00:01: [io  0x0089-0x008b]
pnp 00:01: [io  0x008f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io  0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x0378-0x037f]
pnp 00:05: [io  0x0778-0x077f]
pnp 00:05: [irq 7]
pnp 00:05: [dma 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: [mem 0x000d0000-0x000d3fff window]
pnp 00:06: [mem 0x000d4000-0x000d7fff window]
pnp 00:06: [mem 0x000de000-0x000dffff window]
pnp 00:06: [io  0x0010-0x001f]
pnp 00:06: [io  0x0022-0x003f]
pnp 00:06: [io  0x0044-0x005f]
pnp 00:06: [io  0x0062-0x0063]
pnp 00:06: [io  0x0065-0x006f]
pnp 00:06: [io  0x0072-0x007f]
pnp 00:06: [io  0x0080]
pnp 00:06: [io  0x0084-0x0086]
pnp 00:06: [io  0x0088]
pnp 00:06: [io  0x008c-0x008e]
pnp 00:06: [io  0x0090-0x009f]
pnp 00:06: [io  0x00a2-0x00bf]
pnp 00:06: [io  0x00e0-0x00ef]
pnp 00:06: [io  0x04d0-0x04d1]
pnp 00:06: [io  0x0500-0x057f]
pnp 00:06: [io  0x0580-0x05ff]
pnp 00:06: [io  0x0800-0x087f]
pnp 00:06: [io  0x0880-0x08ff]
pnp 00:06: [io  0x0d00-0x0d7f]
pnp 00:06: [io  0x0d80-0x0dff]
pnp 00:06: [io  0x1100-0x117f]
pnp 00:06: [io  0x1180-0x11ff]
pnp 00:06: [mem 0xfec80000-0x1fd93ffff]
pnp 00:06: [mem 0xfefe0000-0xfefe01ff]
pnp 00:06: [mem 0xfefe1000-0xfefe1fff]
pnp 00:06: [mem 0xfee01000-0xfeefffff]
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: [io  0x0500-0x057f] has been reserved
system 00:06: [io  0x0580-0x05ff] has been reserved
system 00:06: [io  0x0800-0x087f] has been reserved
system 00:06: [io  0x0880-0x08ff] has been reserved
system 00:06: [io  0x0d00-0x0d7f] has been reserved
system 00:06: [io  0x0d80-0x0dff] has been reserved
system 00:06: [io  0x1100-0x117f] has been reserved
system 00:06: [io  0x1180-0x11ff] has been reserved
system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
system 00:06: [mem 0xfec80000-0x1fd93ffff] could not be reserved
system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x0060]
pnp 00:07: [io  0x0064]
pnp 00:07: [mem 0xfec00000-0xfec00fff]
pnp 00:07: [mem 0xfee00000-0xfee00fff]
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io  0x0280-0x028f]
pnp 00:09: [io  0x0290-0x029f]
system 00:09: [io  0x0280-0x028f] has been reserved
system 00:09: [io  0x0290-0x029f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xfc000000-0xfdffffff]
system 00:0a: [mem 0xfc000000-0xfdffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0b: [mem 0x000e0000-0x000fffff]
pnp 00:0b: [mem 0x00100000-0xdfffffff]
pnp 00:0b: [mem 0xff380000-0xffffffff]
pnp 00:0b: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xfc000000-0xfdffffff]; adding more reservations
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:0b: [mem 0xff380000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:09.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:04.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xff37ffff]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xe0000000-0xff37ffff]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1368372591.216:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 7872
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
pata_acpi 0000:00:08.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
pata_acpi 0000:00:08.1: setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfbefec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-28-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfbeff000
Freeing initrd memory: 15264k freed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-28-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
  Magic number: 13:411:487
rtc_cmos 00:02: setting system clock to 2013-05-12 15:29:52 UTC (1368372592)
powernow-k8: Found 1 AMD Phenom(tm) II X4 B55 Processor (4 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (3300 MHz)
powernow-k8:    1 : pstate 1 (2600 MHz)
powernow-k8:    2 : pstate 2 (2100 MHz)
powernow-k8:    3 : pstate 3 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 948k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1360k freed
Freeing unused kernel memory: 1064k freed
udevd[98]: starting version 175
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
sata_nv 0000:00:08.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20
ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
forcedeth 0000:00:07.0: setting latency timer to 64
ata1.00: ATA-6: WDC WD800BB-56JKC0, 05.01C05, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA 
ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:900:0x11)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BB-56JK 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
ata2: port disabled--ignoring
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-2: new low-speed USB device number 2 using ohci_hcd
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr bc:5f:f4:00:d4:8a
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-2: New USB device found, idVendor=062a, idProduct=0201
usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-2: Product: USB-compliant keyboard
Refined TSC clocksource calibration: 3384.925 MHz.
Switching to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB-compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
hid-generic 0003:062A:0201.0001: input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.0-2/input0
input: USB-compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3
hid-generic 0003:062A:0201.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:02.0-2/input1
usb 2-9: new low-speed USB device number 3 using ohci_hcd
usb 2-9: New USB device found, idVendor=17ef, idProduct=6014
usb 2-9: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-9: Product: Lenovo Mini Wireless Keyboard
input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input4
hid-generic 0003:17EF:6014.0003: input,hidraw2: USB HID v1.11 Keyboard [Lenovo Mini Wireless Keyboard] on usb-0000:00:02.0-9/input0
input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/input/input5
hid-generic 0003:17EF:6014.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Lenovo Mini Wireless Keyboard] on usb-0000:00:02.0-9/input1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 4192252k swap on /dev/sda5.  Priority:-1 extents:1 across:4192252k 
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[350]: starting version 175
microcode: CPU0: patch_level=0x010000b6
lp: driver loaded but no devices found
type=1400 audit(1368372605.922:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=415 comm="apparmor_parser"
type=1400 audit(1368372605.922:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=486 comm="apparmor_parser"
type=1400 audit(1368372605.922:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=415 comm="apparmor_parser"
type=1400 audit(1368372605.922:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=486 comm="apparmor_parser"
type=1400 audit(1368372605.922:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=415 comm="apparmor_parser"
type=1400 audit(1368372605.922:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser"
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
microcode: CPU0: new patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000b6
ppdev: user-space parallel port driver
microcode: CPU1: new patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000b6
microcode: CPU2: new patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000b6
microcode: CPU3: new patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: disabled by bios
i2c i2c-0: nForce2 SMBus adapter at 0x600
i2c i2c-1: nForce2 SMBus adapter at 0x700
kvm: disabled by bios
lp0: using parport0 (interrupt-driven).
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
hda_intel: Disabling MSI
snd_hda_intel 0000:00:05.0: setting latency timer to 64
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
kvm: disabled by bios
kvm: disabled by bios
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this sytem
input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:02:00.1: irq 43 for MSI/MSI-X
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input9
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3792 MBytes.
[fglrx]   vendor: 1002 device: 6758 count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 12.10.5 [Mar 28 2013] with 1 minors
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (783) killed by TERM signal
type=1400 audit(1368372608.114:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=851 comm="apparmor_parser"
type=1400 audit(1368372608.114:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=852 comm="apparmor_parser"
type=1400 audit(1368372608.114:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=852 comm="apparmor_parser"
type=1400 audit(1368372608.114:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=852 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X
forcedeth 0000:00:07.0: eth0: MSI enabled
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90003900000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
fglrx_pci 0000:02:00.0: irq 45 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1149
[fglrx] Firegl kernel thread PID: 1150
[fglrx] Firegl kernel thread PID: 1151
[fglrx] IRQ 45 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f8a4000, size:45c000 
[fglrx] Reserved FB block: Unshared offset:7fff4000, size:c000 
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
audit_printk_skb: 45 callbacks suppressed
type=1400 audit(1368372642.967:27): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1823 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
type=1400 audit(1368372915.802:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=893 comm="cupsd" pid=893 comm="cupsd" capability=36  capname="block_suspend"
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
type=1400 audit(1368373470.886:29): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=893 comm="cupsd" pid=893 comm="cupsd" capability=36  capname="block_suspend"
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
type=1400 audit(1368375451.446:30): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=893 comm="cupsd" pid=893 comm="cupsd" capability=36  capname="block_suspend"
type=1400 audit(1368377131.494:31): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=893 comm="cupsd" pid=893 comm="cupsd" capability=36  capname="block_suspend"
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
usb 2-9: USB disconnect, device number 3
usb 2-9: new low-speed USB device number 4 using ohci_hcd
usb 2-9: New USB device found, idVendor=1bcf, idProduct=0005
usb 2-9: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-9: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input10
hid-generic 0003:1BCF:0005.0005: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-9/input0
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.

Return To AMD Radeon HD 6670 System Information